|
MIL-STD-2073
|
This document outlines standard processes to protect the material from mechanical and physical damage, environmentally induced deterioration and
corossion, and other degradation during shipment, handling and storage.
|
| MIL-STD-129 - Military Marking for Shipment and Storage |
|
This standard provides the minimum requirements for uniform military marking for shipment and storage. Additional markings may be required by the contract or the cognizant activity.
|
| MIL-DTL-117 - Bags, Heat-Sealable. |
|
This document covers heat-sealable bags used in military preservation.
|
| MIL-PRF-121 - Barrier Materials, Greaseproof, Waterproof, Flexible, Heat-Sealable |
|
This specification establishes the requirements for heat-sealable, greaseproof, waterproof, flexible barrier material used for the preservation of military supplies and equipment.
|
| MIL-PRF-131 - Barrier Materials, Watervaporproof, Greaseproof, Flexible, Heat-Sealable |
|
This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging.
|
| MIL-PRF-81705 - Barrier Material, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
|
This specification establishes the requirements for heat-sealable, electrostatic discharge protective, flexible barrier materials used for the military packaging of microcircuits, sensitive semiconductor devices, sensitive resistors, and associated higher assemblies. In addition, the type I materials provide for watervaporproof protection and attenuation of electromagnetic interference effects (see 6.1).
|
| MIL-PRF-3420 - Wrapping Materials, Volatile Corrosion Inhibitor Treated, Opaque |
|
This specification covers wrapping materials (carriers) which have been treated either by coating or impregnating with a corrosion inhibitor.
|
| MIL-D-3464 - Desiccants, Activated, Bagged, Packaging Use and Static Dehumidification |
|
This specification covers bagged, chemically inert, dehydrating agents that prevent corrosion and mildew by adsorbing the moisture from the air of an enclosed space.
|
| MIL-PRF-22191 - Barrier Materials, Transparent, Flexible, Heat-Sealable |
|
This specification establishes the requirements for transparent, flexible, heat-sealable barrier materials having waterproof or low water vapor transmission characteristics for use in military packaging (see 6.1).
|
| MIL-DTL-22020 - Bags, Transparent, Flexible, Sealable, Volatile Corrosion Inhibitor Treated |
|
This document covers volatile corrosion inhibitor (VCI) treated flexible transparent bags used in military preservation.
|
| MIL-PRF-16173 - Corrosion Preventive Compound, Solvent Cutback, Cold-Application |
|
This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.
|
| MIL-I-8574 - Inhibitors, Corrosion, Volatile, Utilization Of |
|
This specification covers procedures for the use of volatile corrosion inhibitors in the packaging of equipment.
|
| MIL-DTL-6060 - Bags, Watervaporproof, Heat-Sealable, Complex |
|
This specification covers heat-sealable, watervaporproof bags of complex construction for use in military preservation applications.
|
| PPP-B-1672 - Box, Shipping, Reusable with Cushioning. |
|
| A-A-3174 - Plastic Sheet, Polyolefin. |
|
This document covers requirements for polyolefin film. Polyolefin film covered by this document is intended for use in general purpose packaging applications where a high degree of water resistance, moderate moisture vapor resistance, and dust protection are desired. The item is not intended for use in special packaging applications where special grease or oil resistance properties may be required. The class 1 film is intended to be used in building material shrouds and similar non-food applications. The class 2 film is intended to be used in food contact and wrapping applications.
|
| MIL-STD-3010 - Test Procedures for Packaging Materials |
|
This document provides a centralized listing of detailed and uniform test methods that have been developed to evaluate relevant properties of materials used in military packaging applications. These standardized test methods may be referenced by number in specific packaging material specifications, as applicable, thus eliminating the need to repetitively detail the standard test method in each material specification.
|
|
| MS20003 - Indicator, Humidity, Card, Three Spot, Impregnated Area (Cobaltous Chloride) |
|
